Bid 1
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Electrical project planning
Electrical panel replacement cost
Plan a panel replacement based on amperage and whether the service needs an upgrade.
Planning estimate—not a contractor quote. The model is separate from the published national guide. A ZIP match applies a broad 2024 BEA state index—not ZIP-level contractor pricing.
Project estimator
Estimate your project
Adjust supported details and recalculate without leaving the page. Expand optional inputs only when they fit your project.
Calculated estimate · national model
$500 to $4,500
Typical model value $1,350 · per panel
United States · HomeNestIQ modeled baseline; no ZIP adjustment
Not saved automatically. Save to your account or use the share link / print controls to keep a copy.
Manage saved estimatesSelected scope · National model
New panel capacity: 200 amps · Utility service upgrade?: No, panel only
This is the current model result for the selected inputs. It is not a contractor quote or a promise of local pricing.
$500–$4,500
Biggest price drivers
- Panel capacity and condition
- Utility coordination
- Permits and code corrections
Major exclusions / unpriced work
- Utility-side work, meter/service entrance, extensive circuit replacement, trenching, drywall/paint, and jurisdiction fees
Three planning scenarios
Same project inputsThe premium-scope figure is the upper end of this model range—not a price for a named premium product or contractor package.
Data coverage: IllustrativeThe national range comes from HomeNestIQ project assumptions. A published guide reference is displayed separately; it is not a verified local observation or a contractor quote.
Cost reference
Angi · electrical panel replacement guideOctober 22, 2026 · Angi reports a 2026 band from 9,551 projects reported by Angi Pros. The typical value displayed here is the arithmetic midpoint of the published band, not an Angi-reported average.
Location context
A supported state price adjustment was unavailable; the national model is shown.
Make this estimate your starting budget
Bring the typical illustrative amount into an editable project plan. Add your scope, contingency, and spending; it is not a quote or guaranteed final price.
Build a project budgetThe link contains the project type and starting amount. No ZIP, account information, or scope notes are included.
Written proposal comparison
Compare two electrical-panel proposals
Compare panel capacity, utility coordination, and code corrections. Electrical work should be scoped by a qualified professional.
Planning reference: $500–$4,500, typical $1,350 · HomeNestIQ planning model. This is context only—not a verdict on either contractor.
Bid 2
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Comparison summary
Enter both total prices to compare them. Blank totals are Not specified.
No scope differences are recorded. Blank fields are still Not specified; that does not confirm the written scopes match.
Bid details stay in this page's temporary memory; they are not stored, sent to HomeNestIQ, or included in estimate-sharing links. Copy or print only when you choose to keep a summary.
No proposal is rated as fair or unfair. Confirm matching scope, exclusions, site conditions, warranty, and licensing before making a decision.
Methodology, assumptions, and sources
How this result is calculated
HomeNestIQ calculates an illustrative planning range from the selected project inputs. It is not a quote, a bid, or a promise of final cost.
Calculation assumptions
- • Panel replacement only unless service upgrade is selected; utility coordination and extensive code corrections vary.
- • Illustrative seed model only: no verified local price feed or contractor quote is connected.
- • No supported ZIP-to-state match was available, so the national HomeNestIQ model is shown without a geographic multiplier.
- • This is a model-based planning range; published cost-guide figures are shown separately and are not contractor quotes for this project.
Published reference data
Angi reports a 2026 band from 9,551 projects reported by Angi Pros. The typical value displayed here is the arithmetic midpoint of the published band, not an Angi-reported average.
Angi’s published panel-replacement band is $518–$2,193; its guide says complex service upgrades, relocation, wiring, and code corrections can reach $4,500 or more. Reference updated October 22, 2026.
Angi · electrical panel replacement guideEstimate inputs: New panel capacity: 200 amps · Utility service upgrade?: No, panel only · Benchmark data year: 2026. A contractor should inspect the home and provide a written, itemized proposal.
Keep planning without sharing contact details
Your estimate, printable result, and available bid-comparison tools work for guests. No contact form is needed; bid entries stay in this browser unless you clear them.
Published national guide
Reference range—not local pricing
Angi · electrical panel replacement guide· updated October 22, 2026- Low
- $518
- HomeNestIQ midpoint of published band
- $1,356
- High
- $2,193
Source scope and model assumptions
Published guide scope
Angi’s published panel-replacement band is $518–$2,193; its guide says complex service upgrades, relocation, wiring, and code corrections can reach $4,500 or more.
Angi reports a 2026 band from 9,551 projects reported by Angi Pros. The typical value displayed here is the arithmetic midpoint of the published band, not an Angi-reported average.
Unadjusted HomeNestIQ model baseline
- Low
- $518
- Typical
- $1,356
- High
- $4,500
Before supported project inputs or any applicable broad state-level proxy.
High. The panel, service entrance, grounding, circuits, utility requirements, and code corrections have not been inspected. The national guide band is not a price for a full service upgrade.
Cost factors and bid checklistOpen practical project considerations to review before comparing written proposals.
What influences the final price?
- Panel capacity and condition
- Utility coordination
- Permits and code corrections
Source notes, regional context, and homeowner guidanceOpen published references, cost drivers, permits, maintenance, hiring questions, and option comparisons.
National cost reference
Published guide range—not a local quote
Low guide value
$518
HomeNestIQ midpoint of published band
$1,356
High guide value
$2,193
Scope: Angi’s published panel-replacement band is $518–$2,193; its guide says complex service upgrades, relocation, wiring, and code corrections can reach $4,500 or more.
Source basis: Angi reports a 2026 band from 9,551 projects reported by Angi Pros. The typical value displayed here is the arithmetic midpoint of the published band, not an Angi-reported average.
Source page updated October 22, 2026. Angi is a third-party cost-guide publisher; HomeNestIQ has not independently audited the underlying project reports. The national guide is context, not a verified observation for your ZIP.
The central value is calculated as the midpoint of the cited low/high band because the source does not publish a comparable average for this scope.
HomeNestIQ model baseline: $518 low · $1,356 modeled typical · $4,500 high before size, material, scope, and state-index adjustments. This is a model input, not a national contractor-price observation.
Regional labor and materials context
A state index is not a local bid
The calculator may apply a broad BEA state price-parity factor to its modeled range. It is a general purchasing-power proxy, not project-specific labor or material pricing.
BLS occupational wage tables describe employee wages, not contractor bill rates, overhead, insurance, dispatch minimums, or project bids. Neither data source validates a ZIP-level quote. BEA RPP data · BLS OEWS tables.
Common configurations and timing
Scope, options, and schedule
Panel replacement may involve service capacity, utility disconnect/reconnect, grounding/bonding, circuit labeling, permit, and inspection. The selected amperage does not prove the home needs that capacity.
Typical schedule
A panel-only swap may occupy most of a workday. Utility coordination, service entrance changes, inaccessible wiring, corrections, and inspection can extend the outage and schedule.
Specifications that move the price
- Panel capacity and available service, confirmed by load calculation
- Panel location, meter/service changes, circuit condition, and grounding/bonding
- Utility scheduling, permits, required corrections, and wall repair
- Generator, EV charger, heat pump, or other planned electrical loads
Permitting and regulation
Local requirements to verify
- Confirm the permit, inspection, utility disconnect/reconnect, and service-upgrade approval process with the local building department and utility.
- Have a licensed electrician document the load basis, grounding/bonding work, circuit corrections, and inspection closeout.
Rules vary by jurisdiction and project scope. Confirm requirements with the local building department or utility; this research is not legal or code advice.
Ongoing ownership cost
Maintenance and recurring expenses
A panel does not create energy savings by itself. Include future load needs, surge protection, inspection, and accessible circuit labels in the value comparison.
Maintenance notes describe recurring tasks and cost drivers, not a standardized annual dollar estimate. Ongoing maintenance is not included in the one-time project range unless a page explicitly says otherwise; use product documentation, actual service quotes, and your usage to build a separate ownership budget.
Budget completeness
Common cost overruns and extras
- The linked 2026 guide reports permits of $50–$300; utility and inspection fees may be separate locally.
- Utility disconnect/reconnect and outage window
- Grounding, bonding, surge protection, and circuit corrections
- Temporary power, drywall/paint, and wiring after panel relocation
Avoid overspending
- Ask for a load calculation before upgrading capacity.
- Separate panel-only work from service entrance, utility, wiring, and drywall scope.
- Verify whether permits and inspection are included; never trade away code compliance for a lower bid.
Hiring checklist
When to hire—and what to ask
Panel work is safety-critical and should be handled by a licensed electrician under local rules. A utility service upgrade may also require utility coordination and inspection.
Questions for contractors
- Is this panel-only or a service entrance upgrade, and what load calculation supports the amperage?
- Which permit, utility disconnect, grounding, circuit, labeling, and inspection items are included?
- How long will power be off, and what restoration work is excluded?
Warning signs to investigate
- Recommendation for a higher amperage without a load calculation or planned-load explanation
- No permit or utility coordination plan where required
- A quote that calls wiring, grounding, or relocation “extra” without unit pricing or scope
Compare the trade-offs
Repair, upgrade, or replace?
Repair vs. replace
An electrician may repair an individual breaker or connection when safe and appropriate. Heat, corrosion, obsolete equipment, capacity needs, or repeated faults require a professional evaluation; symptoms alone do not establish a replacement need.
Budget vs. premium
Compare listed panel brands, breaker compatibility, circuit space, and warranty. A higher amp rating is not automatically better if the service and calculated loads do not support it.
DIY vs. professional
There is no safe homeowner DIY panel replacement path. Keep the area clear and provide circuit/load information; leave electrical diagnosis and work to a licensed professional.
Expected useful life
Panel condition and safety matter more than a target age. Have a qualified electrician assess recalls, corrosion, heat, damage, and compatibility.
Questions homeowners ask
Common questions
Does this include a service-line upgrade?+
The base assumption is panel-only. Utility-side work, meter changes, and extensive corrections can increase cost and require coordination.
Can I replace an electrical panel myself?+
Panel work presents serious shock and fire risks and is subject to local rules. Consult a properly qualified electrician.
Does the national reference include a 200-amp service upgrade?+
Not necessarily. The cited guide band covers panel replacements; service entrance, utility, relocation, wiring, and correction work can add substantial cost.
Can I choose panel amperage from home size?+
No. A licensed electrician should evaluate existing service and calculated loads, including planned EV, HVAC, cooking, or workshop equipment.
Why is the displayed typical value a midpoint?+
The linked Angi guide provides a low/high band but not one comparable central average in the data we use. HomeNestIQ calculates the midpoint and labels it as modeled.