Bid 1
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Exterior project planning
Fence installation cost
Estimate a new fence installation from total linear footage and common material choices.
Planning estimate—not a contractor quote. The model is separate from the published national guide. A ZIP match applies a broad 2024 BEA state index—not ZIP-level contractor pricing.
Project estimator
Estimate your project
Adjust supported details and recalculate without leaving the page. Expand optional inputs only when they fit your project.
Calculated estimate · national model
$1,850 to $4,850
Typical model value $3,300 · per fence project
United States · HomeNestIQ modeled baseline; no ZIP adjustment
Not saved automatically. Save to your account or use the share link / print controls to keep a copy.
Manage saved estimatesSelected scope · National model
Fence length: 150 · Fence material: Pressure-treated wood · Fence height: 6 feet
This is the current model result for the selected inputs. It is not a contractor quote or a promise of local pricing.
$1,850–$4,850
Biggest price drivers
- Material and height
- Terrain and access
- Gates, removal, and property survey
Major exclusions / unpriced work
- Survey, tree removal, major grading, retaining walls, utility relocation, gate automation, and local permit charges
Three planning scenarios
Same project inputsThe premium-scope figure is the upper end of this model range—not a price for a named premium product or contractor package.
Data coverage: IllustrativeThe national range comes from HomeNestIQ project assumptions. A published guide reference is displayed separately; it is not a verified local observation or a contractor quote.
Cost reference
Angi · fence installation cost guideOctober 13, 2026 · Angi reports a 2026 average based on 2,968 projects reported by Angi Pros, with a broad $6–$50 per linear foot range across materials and types.
Location context
A supported state price adjustment was unavailable; the national model is shown.
Make this estimate your starting budget
Bring the typical illustrative amount into an editable project plan. Add your scope, contingency, and spending; it is not a quote or guaranteed final price.
Build a project budgetThe link contains the project type and starting amount. No ZIP, account information, or scope notes are included.
Written proposal comparison
Compare two fence proposals
Compare measured length, material, gates, and site preparation before weighing totals.
Planning reference: $1,850–$4,850, typical $3,300 · HomeNestIQ planning model. This is context only—not a verdict on either contractor.
Bid 2
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Comparison summary
Enter both total prices to compare them. Blank totals are Not specified.
No scope differences are recorded. Blank fields are still Not specified; that does not confirm the written scopes match.
Bid details stay in this page's temporary memory; they are not stored, sent to HomeNestIQ, or included in estimate-sharing links. Copy or print only when you choose to keep a summary.
No proposal is rated as fair or unfair. Confirm matching scope, exclusions, site conditions, warranty, and licensing before making a decision.
Methodology, assumptions, and sources
How this result is calculated
HomeNestIQ calculates an illustrative planning range from the selected project inputs. It is not a quote, a bid, or a promise of final cost.
Calculation assumptions
- • Straight fence run with typical access; gates, removal, survey, and unusual terrain can add cost.
- • Illustrative seed model only: no verified local price feed or contractor quote is connected.
- • No supported ZIP-to-state match was available, so the national HomeNestIQ model is shown without a geographic multiplier.
- • This is a model-based planning range; published cost-guide figures are shown separately and are not contractor quotes for this project.
Published reference data
Angi reports a 2026 average based on 2,968 projects reported by Angi Pros, with a broad $6–$50 per linear foot range across materials and types.
National installation project guide. A 150-linear-foot reference project is about $3,500 in the guide; material, height, gates, terrain, and property size change the total. Reference updated October 13, 2026.
Angi · fence installation cost guideEstimate inputs: Fence length: 150 · Fence material: Pressure-treated wood · Fence height: 6 feet · Benchmark data year: 2026. A contractor should inspect the home and provide a written, itemized proposal.
Keep planning without sharing contact details
Your estimate, printable result, and available bid-comparison tools work for guests. No contact form is needed; bid entries stay in this browser unless you clear them.
Published national guide
Reference range—not local pricing
Angi · fence installation cost guide· updated October 13, 2026- Low
- $1,861
- Angi-published average
- $3,278
- High
- $4,845
Source scope and model assumptions
Published guide scope
National installation project guide. A 150-linear-foot reference project is about $3,500 in the guide; material, height, gates, terrain, and property size change the total.
Angi reports a 2026 average based on 2,968 projects reported by Angi Pros, with a broad $6–$50 per linear foot range across materials and types.
Unadjusted HomeNestIQ model baseline
- Low
- $1,861
- Typical
- $3,278
- High
- $4,845
Before supported project inputs or any applicable broad state-level proxy.
High. The model does not know lot boundaries, soil, rock, tree roots, gate count, local height rules, or whether existing fence removal is needed.
Cost factors and bid checklistOpen practical project considerations to review before comparing written proposals.
What influences the final price?
- Material and height
- Terrain and access
- Gates, removal, and property survey
Source notes, regional context, and homeowner guidanceOpen published references, cost drivers, permits, maintenance, hiring questions, and option comparisons.
National cost reference
Published guide range—not a local quote
Low guide value
$1,861
Angi-published average
$3,278
High guide value
$4,845
Scope: National installation project guide. A 150-linear-foot reference project is about $3,500 in the guide; material, height, gates, terrain, and property size change the total.
Source basis: Angi reports a 2026 average based on 2,968 projects reported by Angi Pros, with a broad $6–$50 per linear foot range across materials and types.
Source page updated October 13, 2026. Angi is a third-party cost-guide publisher; HomeNestIQ has not independently audited the underlying project reports. The national guide is context, not a verified observation for your ZIP.
HomeNestIQ model baseline: $1,861 low · $3,278 modeled typical · $4,845 high before size, material, scope, and state-index adjustments. This is a model input, not a national contractor-price observation.
Regional labor and materials context
A state index is not a local bid
The calculator may apply a broad BEA state price-parity factor to its modeled range. It is a general purchasing-power proxy, not project-specific labor or material pricing.
BLS occupational wage tables describe employee wages, not contractor bill rates, overhead, insurance, dispatch minimums, or project bids. Neither data source validates a ZIP-level quote. BEA RPP data · BLS OEWS tables.
Common configurations and timing
Scope, options, and schedule
A new fence estimate depends on measured run length, height, material, corners, gates, posts, terrain, and access. Confirm property lines before digging or ordering materials.
Typical schedule
A standard residential install can take one to three days on site; layout, locating utilities, permits, old-fence removal, roots, slope, or concrete cure can add calendar time.
Specifications that move the price
- Linear footage, height, privacy style, corners, gate width, and post spacing
- Pressure-treated wood, vinyl, composite, or other material and finish
- Slope, soil, roots, utility conflicts, access, and haul-away
- Survey/setbacks, HOA approval, permits, and local frost-depth requirements
Permitting and regulation
Local requirements to verify
- Check local zoning for height, setbacks, easements, visibility, and permit requirements; confirm property boundaries and HOA rules before ordering materials.
- Have underground utilities marked before digging and agree on the fence location with affected neighbors where appropriate.
Rules vary by jurisdiction and project scope. Confirm requirements with the local building department or utility; this research is not legal or code advice.
Ongoing ownership cost
Maintenance and recurring expenses
Include periodic staining/sealing for wood, cleaning, hardware adjustment, post movement, and storm damage. Compare maintenance effort as well as installed price.
Maintenance notes describe recurring tasks and cost drivers, not a standardized annual dollar estimate. Ongoing maintenance is not included in the one-time project range unless a page explicitly says otherwise; use product documentation, actual service quotes, and your usage to build a separate ownership budget.
Budget completeness
Common cost overruns and extras
- The linked guide reports $20–$60 for a fence permit and $3–$5 per linear foot for old-fence removal; verify local requirements.
- Survey or boundary confirmation and neighbor agreement
- Utility marking, gate hardware, concrete, post caps, and corner bracing
- Roots, slope leveling, landscaping repair, and staining/sealing
Avoid overspending
- Measure the run and count gates/corners before comparing bids.
- Do not choose a height or location until setbacks, HOA rules, and local limits are checked.
- Compare wood grade, composite/vinyl specifications, post depth, hardware, removal, and finish—not just linear-foot price.
Hiring checklist
When to hire—and what to ask
Hire a fence installer when the run is long, terrain is steep, gates are heavy, property boundaries are uncertain, or local rules require a permit. Confirm utility marking before excavation.
Questions for contractors
- What measured length, height, material, post spacing, and gate hardware are included?
- Who verifies property line, utility marking, HOA approval, and permit?
- How are removal, slope, roots, concrete, cleanup, and finish priced?
Warning signs to investigate
- A contractor starts digging before utilities are marked
- No written location/height plan or refusal to discuss property lines
- Material description lacks grade, thickness, finish, post, and gate specifications
Compare the trade-offs
Repair, upgrade, or replace?
Repair vs. replace
Repair a small number of sound sections when posts and rails remain stable. Widespread rot, corrosion, leaning, or repeated failures can make replacement more practical; inspect posts before deciding.
Budget vs. premium
Wood has a lower initial cost but needs finish maintenance; vinyl and composite cost more up front and avoid routine staining but still need cleaning and may require specialized repairs.
DIY vs. professional
A short, straight garden fence on known property with easy soil may suit a capable DIYer. Use utility marking and follow local rules; steep terrain, retaining structures, or heavy gates favor a pro.
Expected useful life
Service life depends on material, coating, soil moisture, drainage, installation, and weather. Ask for material and workmanship coverage and maintenance instructions.
Learn before you hire
Related project guidance
Questions homeowners ask
Common questions
Does this include old-fence removal?+
Removal is not included in the baseline. Ask for it as a separate line item if needed.
Are gates included?+
Gate count and style vary. The example assumes a basic straight run and should be adjusted for gates and corners.
Does the national range describe my exact fence length?+
No. It is a broad project guide. Use entered linear feet, height, and material for a modeled range, then add gates, removal, terrain, survey, and local rules.
Should I get a survey before a new fence?+
If the boundary is uncertain or the fence is near a property line, use reliable survey information before excavation. Moving a misplaced fence can cost more than verifying the line first.
Can I install a fence myself?+
A small straight run on easy, known ground may be manageable for an experienced homeowner. Utility marking, property rules, heavy gates, steep grades, and safe digging still matter.