Bid 1
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Kitchen project planning
Kitchen remodel cost
Explore a planning range for a kitchen refresh or remodel, adjusted by approximate room size and finish level.
Planning estimate—not a contractor quote. The model is separate from the published national guide. A ZIP match applies a broad 2024 BEA state index—not ZIP-level contractor pricing.
Project estimator
Estimate your project
Adjust supported details and recalculate without leaving the page. Expand optional inputs only when they fit your project.
Calculated estimate · national model
$14,600 to $41,600
Typical model value $27,000 · per kitchen
United States · HomeNestIQ modeled baseline; no ZIP adjustment
Not saved automatically. Save to your account or use the share link / print controls to keep a copy.
Manage saved estimatesSelected scope · National model
Kitchen floor area: 180 · Finish level: Mid-range · Moving plumbing or walls?: No major layout change
This is the current model result for the selected inputs. It is not a contractor quote or a promise of local pricing.
$14,600–$41,600
Biggest price drivers
- Cabinet and countertop selections
- Appliance scope
- Plumbing, electrical, and layout changes
Major exclusions / unpriced work
- Structural engineering, major utility relocation, temporary kitchen setup, off-site storage, and hidden damage
- Local permit charges, design fees, and owner-selected items beyond the stated allowances
Three planning scenarios
Same project inputsThe premium-scope figure is the upper end of this model range—not a price for a named premium product or contractor package.
Data coverage: IllustrativeThe national range comes from HomeNestIQ project assumptions. A published guide reference is displayed separately; it is not a verified local observation or a contractor quote.
Cost reference
Angi · kitchen remodel cost guideSeptember 4, 2026 · Angi reports a 2026 average from 13,100 projects reported by Angi Pros. Its guide separates minor, major, and complete remodel scopes.
Location context
A supported state price adjustment was unavailable; the national model is shown.
Make this estimate your starting budget
Bring the typical illustrative amount into an editable project plan. Add your scope, contingency, and spending; it is not a quote or guaranteed final price.
Build a project budgetThe link contains the project type and starting amount. No ZIP, account information, or scope notes are included.
Written proposal comparison
Compare two kitchen proposals
Line up allowances, quantities, and trade scope before comparing totals. A blank item stays marked Not specified.
Planning reference: $14,600–$41,600, typical $27,000 · HomeNestIQ planning model. This is context only—not a verdict on either contractor.
Bid 2
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Not specified
Comparison summary
Enter both total prices to compare them. Blank totals are Not specified.
No scope differences are recorded. Blank fields are still Not specified; that does not confirm the written scopes match.
Bid details stay in this page's temporary memory; they are not stored, sent to HomeNestIQ, or included in estimate-sharing links. Copy or print only when you choose to keep a summary.
No proposal is rated as fair or unfair. Confirm matching scope, exclusions, site conditions, warranty, and licensing before making a decision.
Methodology, assumptions, and sources
How this result is calculated
HomeNestIQ calculates an illustrative planning range from the selected project inputs. It is not a quote, a bid, or a promise of final cost.
Calculation assumptions
- • Scope is a broad remodel allowance; permits, appliances, and structural work vary by project.
- • Illustrative seed model only: no verified local price feed or contractor quote is connected.
- • No supported ZIP-to-state match was available, so the national HomeNestIQ model is shown without a geographic multiplier.
- • This is a model-based planning range; published cost-guide figures are shown separately and are not contractor quotes for this project.
Published reference data
Angi reports a 2026 average from 13,100 projects reported by Angi Pros. Its guide separates minor, major, and complete remodel scopes.
Broad national kitchen-remodel guide. Minor refreshes can be below the band; complete layout changes and custom work can exceed it substantially. Reference updated September 4, 2026.
Angi · kitchen remodel cost guideEstimate inputs: Kitchen floor area: 180 · Finish level: Mid-range · Moving plumbing or walls?: No major layout change · Benchmark data year: 2026. A contractor should inspect the home and provide a written, itemized proposal.
Keep planning without sharing contact details
Your estimate, printable result, and available bid-comparison tools work for guests. No contact form is needed; bid entries stay in this browser unless you clear them.
Published national guide
Reference range—not local pricing
Angi · kitchen remodel cost guide· updated September 4, 2026- Low
- $14,592
- Angi-published average
- $26,992
- High
- $41,613
Source scope and model assumptions
Published guide scope
Broad national kitchen-remodel guide. Minor refreshes can be below the band; complete layout changes and custom work can exceed it substantially.
Angi reports a 2026 average from 13,100 projects reported by Angi Pros. Its guide separates minor, major, and complete remodel scopes.
Unadjusted HomeNestIQ model baseline
- Low
- $14,592
- Typical
- $26,990
- High
- $41,619
Before supported project inputs or any applicable broad state-level proxy.
Very high. Cabinet choice, appliance scope, layout changes, concealed utilities, and project duration make a single kitchen average a weak predictor for a specific home.
Cost factors and bid checklistOpen practical project considerations to review before comparing written proposals.
What influences the final price?
- Cabinet and countertop selections
- Appliance scope
- Plumbing, electrical, and layout changes
Source notes, regional context, and homeowner guidanceOpen published references, cost drivers, permits, maintenance, hiring questions, and option comparisons.
National cost reference
Published guide range—not a local quote
Low guide value
$14,592
Angi-published average
$26,992
High guide value
$41,613
Scope: Broad national kitchen-remodel guide. Minor refreshes can be below the band; complete layout changes and custom work can exceed it substantially.
Source basis: Angi reports a 2026 average from 13,100 projects reported by Angi Pros. Its guide separates minor, major, and complete remodel scopes.
Source page updated September 4, 2026. Angi is a third-party cost-guide publisher; HomeNestIQ has not independently audited the underlying project reports. The national guide is context, not a verified observation for your ZIP.
HomeNestIQ model baseline: $14,592 low · $26,990 modeled typical · $41,619 high before size, material, scope, and state-index adjustments. This is a model input, not a national contractor-price observation.
Regional labor and materials context
A state index is not a local bid
The calculator may apply a broad BEA state price-parity factor to its modeled range. It is a general purchasing-power proxy, not project-specific labor or material pricing.
BLS occupational wage tables describe employee wages, not contractor bill rates, overhead, insurance, dispatch minimums, or project bids. Neither data source validates a ZIP-level quote. BEA RPP data · BLS OEWS tables.
Common configurations and timing
Scope, options, and schedule
The model treats a midrange kitchen remodel as a whole-project allowance. Decide whether the work is a refresh, cabinet replacement, full remodel, or structural reconfiguration before comparing estimates.
Typical schedule
A small refresh can take days to a few weeks; a full remodel commonly occupies several weeks, and a major project can run for months when design, inspections, custom cabinets, or material lead times are involved.
Specifications that move the price
- Cabinet refacing versus stock, semi-custom, or custom replacement
- Countertop material, appliance package, flooring, lighting, and finish allowances
- Whether plumbing, gas, electrical, ventilation, or walls move
- Design, contractor coordination, protection, demolition, storage, and sequencing
Permitting and regulation
Local requirements to verify
- Ask the local building department whether the planned structural, electrical, plumbing, gas, or ventilation changes require permits and inspections.
- Put permit responsibility, inspection scheduling, and any required licensed trades in the written scope before demolition.
Rules vary by jurisdiction and project scope. Confirm requirements with the local building department or utility; this research is not legal or code advice.
Ongoing ownership cost
Maintenance and recurring expenses
Include appliance electricity and water use, filter replacements, surface care, and future hardware/finish maintenance. Efficiency savings depend on the specific product and household use.
Maintenance notes describe recurring tasks and cost drivers, not a standardized annual dollar estimate. Ongoing maintenance is not included in the one-time project range unless a page explicitly says otherwise; use product documentation, actual service quotes, and your usage to build a separate ownership budget.
Budget completeness
Common cost overruns and extras
- Cabinet hardware, fillers, panels, delivery, and installation
- The linked 2026 guide reports permits at $460–$2,770; this is a broad published range, not your jurisdiction’s fee.
- Appliance disconnect/reconnect, temporary storage, circuits, gas relocation, ventilation, and code-required upgrades
- Dust protection, meals during downtime, disposal, design fees, and change-order contingency
Avoid overspending
- Keep the appliance and plumbing layout when it already works; moving utilities creates trade and inspection scope.
- Choose cabinet and counter specifications before comparing bids.
- Protect a contingency and approve each change order in writing before the work proceeds.
Hiring checklist
When to hire—and what to ask
Bring in a licensed general contractor for multi-trade, structural, gas, electrical, or plumbing changes. A designer or cabinet planner can reduce late revisions before orders are placed.
Questions for contractors
- Which items are allowances, and what brands, quantities, and installation are included?
- Who coordinates permits, deliveries, protection, and utility shutdowns?
- How are concealed conditions documented and approved before change-order work?
Warning signs to investigate
- A low bid with no cabinet/appliance schedule or vague “standard materials”
- No written change-order process or payment milestones tied to completed work
- Pressure to order custom products before dimensions and rough-ins are finalized
Compare the trade-offs
Repair, upgrade, or replace?
Repair vs. replace
If cabinets are sound, refacing, new fronts, hardware, or targeted countertop work may preserve the layout and cost less than full replacement. Replace cabinets when condition, function, or layout justifies it.
Budget vs. premium
Stock cabinetry, laminate, and standard fixtures usually lower initial spend; custom cabinets, natural stone, integrated appliances, and specialty finishes add fabrication and installation cost.
DIY vs. professional
Painting, hardware, and some backsplash work may suit experienced DIYers. Gas, electrical, structural, heavy stone, and plumbing changes belong with qualified trades.
Expected useful life
Cabinet boxes, doors, counters, appliances, and finishes age differently. Specify repairability, product warranties, replacement-part availability, and care requirements instead of assuming one room-wide lifespan.
Learn before you hire
Related project guidance
Build a Kitchen Remodel Budget That Can Adapt
Separate must-haves from upgrades, track allowances, and keep contingency visible before work begins.
Read the guidePlan a Bathroom Remodel Before Demolition
Understand waterproofing, ventilation, fixture allowances, and layout decisions before approving a bathroom scope.
Read the guideQuestions homeowners ask
Common questions
Is this a cabinet-refacing estimate?+
The baseline represents a broad remodel allowance, not a quote for a specific scope. Cabinet refacing can cost less; custom cabinetry and structural work can cost more.
Why is the range wide?+
Finish choices, hidden conditions, and scope changes create substantial variation. The calculator deliberately shows a range instead of a single promised price.
What usually drives a kitchen remodel above the national range?+
Custom cabinetry, premium counters, appliance packages, layout changes, structural work, and hidden plumbing or electrical corrections can move a project well beyond the average guide range.
Does the calculator include appliances and permits?+
The modeled total is a planning allowance, not a line-item contract. Appliance scope, design, permits, disposal, and utility work vary; confirm each item in your written estimate.
How can I compare two kitchen bids fairly?+
Match the cabinet construction and finish, counter material and square footage, appliance models, trade scope, allowances, demolition, permit handling, schedule, and warranty.